The Best Fortinet NSE7_PBC-7.2 Exam Training materials
P.S. Free 2025 Fortinet NSE7_PBC-7.2 dumps are available on Google Drive shared by LatestCram: https://drive.google.com/open?id=1A-E_CFjLl9OrePGGNqVZ3Vrq0v-HiLIC
Our NSE7_PBC-7.2 Exam Braindumps are the hard-won fruit of our experts with their unswerving efforts in designing products and choosing test questions. Pass rate is what we care for preparing for an examination, which is the final goal of our NSE7_PBC-7.2 certification guide. According to the feedback of our users, we have the pass rate of 99%, which is equal to 100% in some sense. The high quality of our products also embodies in its short-time learning. You are only supposed to practice Fortinet NSE 7 - Public Cloud Security 7.2 guide torrent for about 20 to 30 hours before you are fully equipped to take part in the examination.
To prepare for the NSE7_PBC-7.2 Exam, candidates must have hands-on experience with Fortinet's public cloud security solutions. Candidates are advised to attend Fortinet's official training courses, such as the Fortinet NSE 7 Public Cloud Security course, to gain a deeper understanding of the exam objectives. Additionally, candidates can use Fortinet's official study resources, such as the Fortinet NSE 7 Public Cloud Security Study Guide, to help prepare for the exam.
>> Valid NSE7_PBC-7.2 Test Simulator <<
Free PDF Quiz 2025 NSE7_PBC-7.2: Fortinet NSE 7 - Public Cloud Security 7.2 – Trustable Valid Test Simulator
Our NSE7_PBC-7.2 Research materials design three different versions for all customers. These three different versions include PDF version, software version and online version, they can help customers solve any problems in use, meet all their needs. Although the three major versions of our NSE7_PBC-7.2 Learning Materials provide a demo of the same content for all customers, they will meet different unique requirements from a variety of users based on specific functionality.
Fortinet NSE7_PBC-7.2 Exam Syllabus Topics:
Topic
Details
Topic 1
Topic 2
Topic 3
Topic 4
Fortinet NSE7_PBC-7.2 Certification Exam is intended for professionals who work in public cloud security roles, such as security engineers, cloud security architects, and security operations center (SOC) professionals. NSE7_PBC-7.2 exam is an excellent opportunity for these professionals to demonstrate their expertise in deploying and managing security solutions for public cloud environments. Fortinet NSE 7 - Public Cloud Security 7.2 certification confirms that the individual possesses the required knowledge and skills to secure public cloud environments using Fortinet security solutions.
Fortinet NSE 7 - Public Cloud Security 7.2 Sample Questions (Q76-Q81):
NEW QUESTION # 76
Which statement about immutable infrastructure in automation is true?
Answer: D
Explanation:
The statement that best describes the concept of immutable infrastructure in the context of automation is:
A . It is the practice of deploying a new server for every configuration change.
Immutable Infrastructure Concept: This approach to infrastructure management involves replacing servers or components entirely rather than making changes to existing configurations once they are deployed. When a change is needed, a new server instance is provisioned with the desired configuration and the old one is decommissioned after the new one is successfully deployed and tested.
Benefits: Immutable infrastructure minimizes the risks associated with in-place updates, such as inconsistencies or failures due to configuration drift. It enhances reliability and predictability by ensuring that the deployed environment matches exactly what was tested in staging. This practice is particularly aligned with modern deployment strategies like blue/green or canary deployments.
NEW QUESTION # 77
You are adding a new spoke to the existing transit VPC environment using the AWS Cloud Formation template. Which two components must you use for this deployment? (Choose two.)
Answer: C,D
Explanation:
When using an AWS CloudFormation template to add a new spoke to an existing transit VPC environment, the necessary components are:
The BGPASN value used for the transit VPC (Option C): BGP Autonomous System Number (ASN) is required for setting up BGP routing between the transit VPC and the new spoke. This number uniquely identifies the system in BGP routing and is crucial for correct routing and avoiding routing conflicts.
The tag value of the spoke (Option D): Tags in AWS are used to identify and manage resources. The tag value assigned to a spoke VPC helps in organizing, managing, and locating the VPC within the larger AWS environment. Tags are essential for automation scripts and policies that depend on specific identifiers to apply configurations or rules.
NEW QUESTION # 78
Refer to Exhibit:
The exhibit shows the Connect Peers settings on Amazon Web Services (AWS) transit gateway attachments With two FortiGate VMS in a security VPC.
Which two statements are correct? (Choose two.)
Answer: A,D
Explanation:
Explanation
A: The peer GRE address is the FortiGate external interface IP address. This is the IP address of the FortiGate interface that is connected to the transit gateway attachment subnet1. This IP address is used to establish the GRE tunnel between the FortiGate and the transit gateway2. B. The Transit Gateway GRE address is auto-generated. This is the IP address of the transit gateway that is used to establish the GRE tunnel with the FortiGate2. This IP address is automatically assigned by AWS from the Transit Gateway CIDR range that you specify when you create the Connect attachment3.
The other options are incorrect because:
The BGP inside CIDR blocks cannot be any CIDR block with /29. They must be a /29 CIDR block from the 169.254.0.0/16 range for IPv4, or a /125 CIDR block from the fd00::/8 range for IPv64. These are the inside IP addresses that are used for BGP peering over the GRE tunnel4.
The Peer GRE address is not the FortiGate internal interface IP address. The internal interface IP address is used to route traffic from the FortiGate to the VPC subnet where the third-party appliance (such as SD-WAN) is located1. The Peer GRE address is used to route traffic from the FortiGate to the transit gateway over the GRE tunnel2.
NEW QUESTION # 79
Refer to the exhibit
A customer has deployed an environment in Amazon Web Services (AWS) and is now trying to send outbound traffic from the Linux1 and Linux2 instances to the internet through the security VPC (virtual private cloud). The FortiGate policies are configured to allow all outbound traffic; however, the traffic is not reaching the FortiGate internal interface. Assume there are no issues with the Transit Gateway (TGW) configuration Which two settings must the customer add to correct the issue? (Choose two.)
Answer: A,C
Explanation:
The correct answer is B and C. Both landing subnets in the spoke VPCs must have a 0.0.0.0/0 traffic route to the TGW. Both landing subnets in the security VPC must have a 0.0.0.0/0 traffic route to the FortiGate port2.
According to the AWS documentation for Transit Gateway, a transit gateway is a network transit hub that connects VPCs and on-premises networks. To send outbound traffic from the Linux instances to the internet through the security VPC, you need to do the following steps:
* In the main subnet routing table in the spoke VPCs, add a new route with destination 0.0.0.0/0, next hop TGW. This route directs all traffic from the Linux instances to the TGW, which can then forward it to the appropriate destination based on the TGW route table.
* In the main subnet routing table in the security VPC, add a new route with destination 0.0.0.0/0, next hop FortiGate port2. This route directs all traffic from the TGW to the FortiGate internal interface, where it can be inspected and allowed by the FortiGate policies.
The other options are incorrect because:
* Adding a 0.0.0.0/0 traffic route to the Internet Gateway (IGW) in the spoke VPCs is not correct, as this would bypass the TGW and the security VPC and send all traffic directly to the internet.
* Adding a 0.0.0.0/0 traffic route to the TGW in all the VPCs is not necessary, as only the spoke VPCs need to send traffic to the TGW. The security VPC needs to send traffic to the FortiGate port2.
Transit Gateways - Amazon Virtual Private Cloud:Fortinet Documentation Library - Deploying FortiGate VMs on AWS
NEW QUESTION # 80
Refer to the exhibit
You are tasked to deploy a FortiGate VM with private and public subnets in Amazon Web Services (AWS).
You examined the variables.tf file.
What will be the final result after running the terraform init and terraform apply commands?
Answer: B
Explanation:
Explanation
The variables.tf file shows that the FortiGate VM will be deployed in the eu-West-Ia region with private and public subnets. The region variable is set to "eu-west-1" and the availability_zone variable is set to
"eu-west-1a". The vpc_id variable is set to "vpc-0e9d6a6f" and the subnets variable is set to a list of two subnet IDs: "subnet-0f9d6a6f" and "subnet-1f9d6a6f". The license_type variable is set to "on-demand" and the ami_id variable is set to "ami-0e9d6a6f".
References:
https://docs.fortinet.com/document/fortigate/6.4.0/aws-cookbook/236478/deploying-fortigate-vm-on-aws-using-t
NEW QUESTION # 81
......
Valid NSE7_PBC-7.2 Test Prep: https://www.latestcram.com/NSE7_PBC-7.2-exam-cram-questions.html
BONUS!!! Download part of LatestCram NSE7_PBC-7.2 dumps for free: https://drive.google.com/open?id=1A-E_CFjLl9OrePGGNqVZ3Vrq0v-HiLIC
© 2025 BeXcellent Academy
